November 17, 2013

Sunday double feature 11-17-13

Sunday double feature 11-17-13
Hey Everyone! welcome to the Sunday double feature for Sunday November 17th. As always we have some very cool stuff to talk about. Firstly we take a look at the $95 ATOMIC rebuildable dripping atomizer, and build a sweet coil with 29g Kanthal and organic cotton balls at the end of the video. Then after that the 50cal mod from V3Tronix gets the full rundown. So grab a good vape and enjoy the videos friends!



 The Atomic Rebuildable Atomizer

I received this product at no charge from the vendor for the purpose of doing a video, Therefore it has no monetary value to me. This video is my opinions and experiences with the product, and is in no way intended to be the final hammer of judgment.
Now then. The Atomic RDA feels like a high quality RDA. It’s easy to build both single coils and dual coils. It’s durable, it has “adjustable airflow” and apart from the leaking that happens pretty frequently unfortunately.
It’s really great to vape on. The adjustable airflow is a bit pointless as all the holes give me basically the same experience. It’s screwed down onto and worked with every mod ( mech or otherwise ) i’ve tried it on. It’s also $95 so get those vape budget hands out and see what you can afford or not afford.
The Atomic RDA came from OKCVapes.com , also currently out of stock at the time of shooting this video. http://www.okcvapes.com/mcv-atomic-rba/

 The V3Tronix 50Cal mechanical mod
I received this product at no charge from the vendor for the purpose of doing a video, Therefore it has no monetary value to me. This video is my opinions and experiences with the product, and is in no way intended to be the final hammer of judgment.
Now then. The 50cal is one of the most precicely machined mech mods i’ve come across. In “bullet” mode, it’s a bit of a novelty item, but beyond that it’s actually a pretty legit mech that uses a somewhat crippling battery size. An 18650 version of this device would score MUCH higher in my book. But it is what it is. In the version I have the “beauty ring” that covers up the threads when using it in non ‘bulet mode’ also prevents some RBAs, including the Castle and Nimbus, from screwing down all the way and making a connection.
From what I can tell there is an adapter on the site that will remedy this. But I don’t have said adapter, so I can’t say for sure. The switch is wonderful, springy, easy to lock and unlock and has not missfired on me in any way. It has a nice short travel space which makes it a real joy to use.
The bottom of the line kit is $185, so get out those vape budget hands, and also keep in mind the V3Tronix mods are made and manufactured here in the USA.
The 50cal can be found here http://www.v3tronix.com/collections/all/products/v3-50-caliber-bullet-vaporizer-mod-stainless-steel-version-2
Thanks so much for watching everyone! and feel free to comment below
-Grimm
Sunday double feature 11-17-13 Hey Everyone! welcome to the Sunday double feature for Sunday November 17th. As always we have some very cool stuff to talk about. Firstly we take a look at the $95 ATOMIC rebuildable dripping atomizer, and build a sweet coil with 29g Kanthal and organic cotton balls at the end of the video. Then after that the 50cal mod from V3Tronix gets the full rundown. So grab a good vape and enjoy the videos friends! The Atomic Rebuildable Atomizer I received this product at no charge from the vendor for the purpose of doing a video, Therefore it has no monetary value to me. This video is my opinions and experiences with the product, and is in no way intended to be the final hammer of judgment. Now then. The Atomic RDA feels like a high quality RDA. It’s easy to build both single coils and dual coils. It’s durable, it has “adjustable airflow” and apart from the leaking that happens pretty frequently unfortunately. It’s really great to vape on. The adjustable airflow is a bit pointless as all the holes give me basically the same experience. It’s screwed down onto and worked with every mod ( mech or otherwise ) i’ve tried it on. It’s also $95 so get those vape budget hands out and see what you can afford or not afford. The Atomic RDA came from OKCVapes.com , also currently out of stock at the time of shooting this video. http://www.okcvapes.com/mcv-atomic-rba/ The V3Tronix 50Cal mechanical mod I received this product at no charge from the vendor for the purpose of doing a video, Therefore it has no monetary value to me. This video is my opinions and experiences with the product, and is in no way intended to be the final hammer of judgment. Now then. The 50cal is one of the most precicely machined mech mods i’ve come across. In “bullet” mode, it’s a bit of a novelty item, but beyond that it’s actually a pretty legit mech that uses a somewhat crippling battery size. An 18650 version of this device would score MUCH higher in my book. But it is what it is. In the version I have the “beauty ring” that covers up the threads when using it in non ‘bulet mode’ also prevents some RBAs, including the Castle and Nimbus, from screwing down all the way and making a connection. From what I can tell there is an adapter on the site that will remedy this. But I don’t have said adapter, so I can’t say for sure. The switch is wonderful, springy, easy to lock and unlock and has not missfired on me in any way. It has a nice short travel space which makes it a real joy to use. The bottom of the line kit is $185, so get out those vape budget hands, and also keep in mind the V3Tronix mods are made and manufactured here in the USA. The 50cal can be found here http://www.v3tronix.com/collections/all/products/v3-50-caliber-bullet-vaporizer-mod-stainless-steel-version-2 Thanks so much for watching everyone! and feel free to comment below -Grimm
Sunday double feature 11-17-13

Hey Everyone! welcome to the Sunday double feature for Sunday November 17th. As always we have some very cool stuff to talk about. Firstly we take a look at the $95 ATOMIC rebuildable dripping atomizer, and build a sweet coil with 29g Kanthal and organic cotton balls at the end of the video. Then after that the 50cal mod from V3Tronix gets the full rundown. So grab a good vape and enjoy the videos friends!

The Atomic Rebuildable Atomizer

I received this product at no charge from the vendor for the purpose of doing a video, Therefore it has no monetary value to me. This video is my opinions and experiences with the product, and is in no way intended to be the final hammer of judgment.

Now then. The Atomic RDA feels like a high quality RDA. It’s easy to build both single coils and dual coils. It’s durable, it has “adjustable airflow” and apart from the leaking that happens pretty frequently unfortunately.

It’s really great to vape on. The adjustable airflow is a bit pointless as all the holes give me basically the same experience. It’s screwed down onto and worked with every mod ( mech or otherwise ) i’ve tried it on. It’s also $95 so get those vape budget hands out and see what you can afford or not afford.

The Atomic RDA came from OKCVapes.com , also currently out of stock at the time of shooting this video. http://www.okcvapes.com/mcv-atomic-rba/

The V3Tronix 50Cal mechanical mod

I received this product at no charge from the vendor for the purpose of doing a video, Therefore it has no monetary value to me. This video is my opinions and experiences with the product, and is in no way intended to be the final hammer of judgment.

Now then. The 50cal is one of the most precicely machined mech mods i’ve come across. In “bullet” mode, it’s a bit of a novelty item, but beyond that it’s actually a pretty legit mech that uses a somewhat crippling battery size. An 18650 version of this device would score MUCH higher in my book. But it is what it is. In the version I have the “beauty ring” that covers up the threads when using it in non ‘bulet mode’ also prevents some RBAs, including the Castle and Nimbus, from screwing down all the way and making a connection.

From what I can tell there is an adapter on the site that will remedy this. But I don’t have said adapter, so I can’t say for sure. The switch is wonderful, springy, easy to lock and unlock and has not missfired on me in any way. It has a nice short travel space which makes it a real joy to use.

The bottom of the line kit is $185, so get out those vape budget hands, and also keep in mind the V3Tronix mods are made and manufactured here in the USA.

The 50cal can be found here http://www.v3tronix.com/collections/all/products/v3-50-caliber-bullet-vaporizer-mod-stainless-steel-version-2

Thanks so much for watching everyone! and feel free to comment below

-Grimm

Leave a comment

Comments have to be approved before showing up.